175SS Owners Manual

175SS Owners Manual

Owner’s Manual

1.75 x 9 Stainless Steel

1.75 x 5 Stainless Steel

1.75 x 2 Stainless Steel

1.75 x 2 Titanium

IMPORTANT SAFETY INFORMATION

Read this manual completely before installing or using this product.

Failure to follow all instructions, warnings, and maintenance requirements may result in equipment damage, serious personal injury, or death.

This product is intended only for its designed application and should be installed and used only by individuals familiar with the associated equipment and safe operating practices.

WARNING

  • Improper installation or use may result in catastrophic equipment failure.
  • Failure to verify proper alignment before use may result in component damage, projectile hazards, serious injury, or death.
  • Never use this product if it is damaged, visibly worn, cracked, loose, or suspected of being out of alignment.
  • Always inspect the product before each use.
  • Always wear appropriate eye and hearing protection while operating associated equipment.
  • Ensure all components are properly secured before use.
  • Never modify, weld, machine, or alter this product. Unauthorized modifications may compromise structural integrity and void any warranty.
  • If the product is dropped, struck, or otherwise subjected to significant impact, inspect it thoroughly before further use.
  • Discontinue use immediately if abnormal vibration, unusual noise, or evidence of contact between internal components is observed.

INSTALLATION

Before installation:

  1. Inspect the product for shipping damage or excessive wear.
  2. Ensure all mating surfaces and threads are clean and free of dirt, debris, oil, or metal chips.
  3. Install the product according to the manufacturer’s specifications.

Fastener Torque

Torque all applicable fasteners to:

10 ft-lb (13.6 N·m)

Do not overtighten. Excessive torque may damage threads or components.

PRE-USE INSPECTION

Before every use:

  • Verify the product is securely installed.
  • Inspect for cracks, dents, corrosion, or other damage.
  • Verify all threaded connections are fully engaged.
  • Check concentricity using an appropriate alignment rod before use.
  • Do not operate the product if alignment cannot be verified or if any defect is found.

MAINTENANCE

Routine maintenance is essential for reliable operation.

Cleaning Interval

Clean the product every 2,500 operating cycles, or more frequently if operating conditions require.

Cleaning Procedure

  1. Remove the product from service.
  2. Inspect for visible fouling or debris.
  3. Clean using either:
    • A suitable solvent bath, or
    • An ultrasonic cleaner with an appropriate cleaning solution.
  4. Allow all components to dry completely.
  5. Inspect for wear, damage, corrosion, or thread damage before returning the product to service.

Do not use damaged or excessively worn components.

STORAGE

  • Store in a clean, dry location.
  • Protect from excessive moisture and corrosive environments.
  • Keep out of reach of unauthorized persons and children.

Product Liability Disclaimer for Suppressor

WARNING: This suppressor is a regulated firearm accessory and must be used in strict accordance with all applicable federal, state, and local laws. Failure to comply with these laws or the guidelines provided by the manufacturer can result in serious injury or death.

By purchasing, possessing, or using this suppressor, you acknowledge and agree to the following:

  1. Assumption of Risk: The use of this product involves significant risk. Please always check that the firearm is unloaded. The purchaser and/or user assumes full responsibility for the safe handling, installation, and use of the suppressor.
  2. Proper Use Required: This suppressor is designed for lawful use on compatible, legally owned firearms only. Improper installation, unauthorized modifications, or use with incompatible firearms or ammunition may cause malfunction, resulting in severe injury, permanent disability, or death.
  3. No Liability for Misuse: The manufacturer, distributor, and seller disclaim all responsibility for any damages, injuries, or deaths resulting from misuse, negligence, illegal use, or unauthorized modifications of this product.
  4. Legal Compliance: It is the user’s sole responsibility to comply with all federal (including the National Firearms Act), state, and local laws regarding the purchase, ownership, use, and transportation of this suppressor. Improper or unlawful use may result in criminal prosecution, civil liability, serious bodily injury, or death.
  5. Indemnification: The purchaser/user agrees to indemnify, defend, and hold harmless the manufacturer, distributor, and seller from and against all claims, damages, liabilities, costs, and expenses arising from or related to the use, misuse, or unlawful possession of this product.

 

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.