 |
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
175SS Owners Manual
175SS Owners Manual
There are seven unique parts with your suppressor, starting from the muzzle you have:
1: Muzzle Brake
2: Primary Housing
3: Blast Baffle
4: Stackable Baffles
5: End Cap Baffle
6: Restrictor
7: End Cap
Installation:
Be sure to check that your firearm is unloaded. Be sure to check both the chamber as well as the magazine/magwell.
1: Mount your Muzzle device to your rifle: We recommend a torque setting of 20 ft/lbs. We do not recommend using crush washers. If you need to time your muzzle device we recommend precision washers. Crush washers can effect concentricity.
2: Assemble your suppressor: Starting with your Primary Housing, install your Blast Baffle. This baffle can be identified by its .75 through hole that interfaces with your muzzle device. All other baffles have a hex cut out as a through hole.
3: Install your Stackable Baffles: You can chose how many baffles you would like given whatever set-up you are running. This is all personal preferences.
4: Torque to 20ft/lbs with a 1/2 inch Allen Socket.
5: Install your End Cap Baffle: This is a unique baffle as it has protruding material on the backside of the baffle, which is used to support the Restrictor.
6: Install your preferred Restrictor into the End Cap
7: Install the End Cap: Be sure that the Restrictor is properly seated between the End Cap Baffle and the End Cap. These only require to be hand tight
8: Be sure to check for Concentricity before shooting
Product Liability Disclaimer for Suppressor
WARNING: This suppressor is a regulated firearm accessory and must be used in strict accordance with all applicable federal, state, and local laws. Failure to comply with these laws or the guidelines provided by the manufacturer can result in serious injury or death.
By purchasing, possessing, or using this suppressor, you acknowledge and agree to the following:
- Assumption of Risk: The use of this product involves significant risk. Please always check that the firearm is unloaded. The purchaser and/or user assumes full responsibility for the safe handling, installation, and use of the suppressor.
- Proper Use Required: This suppressor is designed for lawful use on compatible, legally owned firearms only. Improper installation, unauthorized modifications, or use with incompatible firearms or ammunition may cause malfunction, resulting in severe injury, permanent disability, or death.
- No Liability for Misuse: The manufacturer, distributor, and seller disclaim all responsibility for any damages, injuries, or deaths resulting from misuse, negligence, illegal use, or unauthorized modifications of this product.
- Legal Compliance: It is the user’s sole responsibility to comply with all federal (including the National Firearms Act), state, and local laws regarding the purchase, ownership, use, and transportation of this suppressor. Improper or unlawful use may result in criminal prosecution, civil liability, serious bodily injury, or death.
- Indemnification: The purchaser/user agrees to indemnify, defend, and hold harmless the manufacturer, distributor, and seller from and against all claims, damages, liabilities, costs, and expenses arising from or related to the use, misuse, or unlawful possession of this product.
