.
Our Complete Upper Includes:
Advantage Arms Forward Charging Handle System,
Ballistic Advantage Barrel (with Sub-MOA Guarantee)
Ballistic Advantage Upper Assembly
Ballistic Advantage BCG
VG6 Precision Epsilon 556SL
Standard Charging Handle
Additional Specs:
Ballistic Advantage Barrel (with Sub-MOA Guarantee)
Our 5.56 chambered 16 inch Government Profile Carbine Length Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.
Additional Info
Length | 16" |
Material | 4150 Chrome Moly Vanadium |
Profile | Government |
Finish | QPQ Corrosion Resistant |
Gas System Length | Carbine |
Gas Block Journal | .750" |
Twist Rate | 1:7 inches |
Muzzle | 1/2x28 Threaded |
Guaranteed to Perform
We are committed to providing products that meet, or exceed, the expectations of our most discerning customers. We stand behind that commitment. From the moment you unwrap one of our barrels, as you configure it with your receivers and handguards, and as you fire it on the range or in the field, we want you to experience the unique elegance and uncompromising quality that we craft into every one of our barrels.
We also stand behind our commitment to performance. All Ballistic Advantage barrels are guaranteed to give sub Minute of Angle (MOA) accuracy with match grade ammunition.
Ballistic Advantage Upper Assembly
AR15 Assembled Upper Receiver. Forged from 7075-T6 aluminum, this assembled upper is precision machined to mil-spec M16/M4 specifications and features M4 feedramps.
Threaded Forward Assist Roll Pin - Allows for simple installation of the forward assist and eliminates the chance to damage the finish during installation (pin included).
M4 Feedramps
.250 takedown pin holes
Lazer engraved T-marks
Ballistic Advantage branded
AR15 Assembled Upper Receiver in Anodized Black
Features:
New enhanced forging that gives the upper receiver a "billet look"
New Picatinny profile that blends seamlessly with our Enhanced Lowers.
M4 Feedramps
.250 takedown pin holes
Laser engraved T-marks
Includes threaded forward assist roll pin
Include port door or forward assist
Ballistic Advantage BCG
M16 Carrier Machined from 8620
5.56 Bolt Machined from 9310
Forged Gas Key Properly Staked
Tool Steel Extractor
Mil-Spec Extractor Spring with black insert and Viton O-Ring
Grade 8 hardware
Shot Peened Bolt
HPT/MPI
Carrier, Gas Key, Cam Pin, Bolt, & Extractor coated inside and out with Diamond Like Coating
Test Fired complete before shipping to ensure proper function
Additional Info
Caliber | 5.56/.223 |
Material | 8620 Steel |
Finish | Diamond Like Coating |
VG6 Epsilon 556 Flash Hider
· Length 2.21"
· Diameter 0.745"
· Weight 0.16
· Material 17-4ph® Heat Treated Stainless Steel
· Finish BLACKNITRIDE
· Surface Hardness 68RC
· Caliber 5.56 /.223/.224 Valkyrie
· Threads 1/2-28
· The EPSILON 556SL is the ideal muzzle brake for 14.5" rifle builds. Featuring an outside diameter of .745", the EPSILON 556SL can be pinned and welded to your barrel while still allowing full maintenance and removal of your gas block without having to remove the muzzle device.
The EPSILON 556SL utilizes a new aggressive chamber design that improves gas flow and reduces felt recoil significantly. It also features deep channel cuts that greatly reduce the overall weight toward the front end of your build.
Slim in design does not mean slim in performance. Users can still expect the same great performance they have grown to trust from VG6 Precision muzzle brakes. With the EPSILON 556SL, you have the optimal solution for a lightweight, legal (when pinned and welded) and flat shooting 14.5" Rifle Build.
NOTE: The EPSILON 556SL cannot be shipped to the State of California due to new legislation. This is considered a flash hider.
The CAGE Device is NOT compatible with the Epsilon 556SL
Additional Info
Caliber | 5.56/.223 |
Muzzle Body Length | 2.21" |
Muzzle Body Diameter | .86 |
Thread Pitch | 1/2-28 |